- Stainless steel passivator for rapid formation of a passivation chromium oxide layer.
- Mainly used after pickling by spraying and immersion methods.
- Also used to restore the passivation layer
- After mechanical treatment of stainless steel surfaces.
- Before use, dilute with distilled water in a 1:1 ratio.
- Pickling time: 20-30 min.
- Yield (1 kg): 20-25 m2.
Instructions for use:
Before starting work, follow safety rules and use protective equipment. Antox 90E is used with distilled water in a 1:1 volume ratio. First add the water, then add the same amount of Antox 90E. Adhere to the recommended passivation times, which for stainless and acid-resistant steel are 20-30 minutes. Optimal application temperature for Antox 90E is about 18-22°C. Surfaces should then be thoroughly rinsed with cold, distilled water. Rinse until the runoff water is neutral (check using indicator paper). Neither Antox 90E nor the rinsing water may be discharged into public sewage in an untreated state (they are acidic and contain alloy residues from processed metals). Suitable treatment should be carried out in an appropriate neutralization installation or disposal should be performed by a licensed waste disposal company. Local waste management regulations must be observed.
Shelf life: 36 months
Wastewater disposal:
Because wastewater from rinsing is acidic and contains heavy metals, it must be collected. The collected rinsing water should be disposed of in an environmentally friendly manner. Deliver to your own wastewater treatment plant (consult your treatment plant operator) or arrange for disposal by a specialized company.
NOTICE
Product intended for sale only to business entities and sole proprietors.