- Stainless steel passivator for fast production of a passivation layer of chromium oxide.
- Mainly used after pickling by spray and immersion method.
- Also used to restore the passivation layer
- After mechanical treatment of stainless steel surfaces.
- Before use, dilute with distilled water in a 1:1 ratio.
- Pickling time: 20-30 min.
- Yield (1 kg): 20-25 m2.
Instructions for use:
Before starting work, observe safety rules and use protective equipment. Antox 90E should be used with distilled water in a 1:1 volume ratio. First add the water, then add the same amount of Antox 90E. Observe the recommended passivation times, which for stainless and acid-resistant steel is 20-30 minutes. The optimal application temperature of Antox 90E is approximately 18-22°C. Surfaces should then be thoroughly rinsed with cold, distilled water. Rinse until the running water is neutral (check with indicator paper). Neither Antox 90E nor the rinsing water may be discharged into public sewage systems in an untreated state (they are acidic and contain residues of solid alloys from processed metals). Appropriate purification must be carried out in a suitable neutralization installation or disposal must be handled by a licensed waste disposal company. Local waste management regulations must be observed.
Shelf life: 36 months
Wastewater disposal:
Since rinsing wastewater is acidic and contains heavy metals, it should be collected. The collected rinsing water must be disposed of in an environmentally friendly way. Deliver to your own wastewater treatment plant (consult the treatment plant operator) or outsource disposal to a specialized company.
ATTENTION
Product for sale only to business entities and sole proprietors.