Key advantages of FANMIG 5:
- Welding with MIG/MAG method with synergic or manual settings, as well as MMA electrode.
- High welding current 500A/60% and 420A/100% (MMA 400A/100%).
- Synergic programs for welding steel or stainless steel, aluminum, or other wire diameters in manual mode.
- Easy-to-use control panel consistent across all models.
- Strong wire feeding unit, 37/19 type rollers, wire feed speed 1-25 (compact 26) m/min.
- Memory for up to 99 programs.
MODEL: FANMIG 5 GP
- COOLING: Gas cooling of the welding gun
- SEPARATE WIRE FEEDER: 5m intermediate cable
- The device is supplied with a ground cable and gas hose, 1.0-1.2 mm rollers.
- Standard length of intermediate cables is 5 m, optional 1.2 m; 10 m or 15 m.
| Model | FANMIG 5 | |
| Welding method | MIG/MAG | MMA |
| Power supply | 3x400 V / 50/60 Hz | |
| Welding current range | 40 A/16.0 V - 500 A/39.0 V | 10 A / 20.4 V / 400 A / 36.0 V |
| Welding current | 420 A / 35.0 V (100% duty cycle) | 400 A/ 36 V (100% duty cycle) |
| 500 A / 39.0 V (60% duty cycle) | ||
| Welding current adjustment | Stepless | |
| Wire feed speed | 1 - 25 (compact 26) m/min | x |
| Power source efficiency | 90% | |
| Idle current consumption | 20 W | |
| Enclosure protection class | IP23S | |
The FANMIG 5 devices comply with the 2009/125/EC Ecodesign Directive and Regulation 2019/1784 (EU).