MOST FANMIG J23 MIG/MAG Welding Gun Semi-Automatic.
FANMIG J23 MOST is a modern inverter MIG/MAG welding gun semi-automatic for welding using the MIG/MAG process. The device is intended for welding steel or stainless steel in a shielding gas mixture, suitable for craftsmanship, automotive bodywork, hobby work, etc. Welding parameters are set via the front panel of the welder. The device is powered from a single-phase 230 V mains supply. The wire feeder enables welding with wire from 15 kg/B300 and 5 kg/D200 spools. Recommended steel wire diameters are 0.8 mm and 1.0 mm. Due to the device's dimensions, the height of the gas cylinder must not exceed 120 cm and the diameter must not exceed 20 cm. The device is protected against overheating by a thermal sensor. The device is manufactured in accordance with EN 60974-1 standard.
Higher welding current than similar, traditional semi-automatics powered from a 230 V supply.
Very good welding properties. Setting the welding current potentiometer and the wire feed speed potentiometer to the same position (e.g. both at nine o'clock, twelve o'clock, etc.) guarantees a stable, quiet welding arc with minimal spatter.
Durable welding tractor adapted to carry a small gas cylinder, front swivel wheel with brake.
Welding current display.
Only metal parts of the wire feeder, standard 22/30 type rollers.
Euro socket for connecting any MIG/MAG welding gun handle.
Durable housing, powder-coated covers.
Low weight, only 24 kg.
Quiet fan.
Brand proven in the industry.